Laboratory Incubator

· Outer Construction:MS powder coated.

· Inner Construction : The inner walls of the incubator will be pasted with laminated sheet to Avoid heat loss. 

· Samples viewing: Transparent Acrylic frame window allows unobstructed view of the

 Chamber contents from front, two sides and from top.

· Inbuilt Lighting: Built in lightning attachment with low wattage provided with External

Switch on the front panel.

· Chamber Size in mm: 500 x 500 x 300 mm

· Temperature range: (5⁰C above Ambient ) to 60 ⁰ C, Accuracy/ Uniformity: ± 0.5 ⁰C/ ± 1 ⁰C.

· Display Control : Microprocessor based PID control of Accuracy ± 0.1 ⁰C by using PT 100 Sensor.

· Speed Indicator: Digital Speed Indicator on the front panel.

· Drive Mechanism: The drive mechanism is powered by a permanent Magnet Geared D.C. motor with 25mm diameter motion

· Amplitude: 25 mm dia Orbital motion.

· Shaking Speed: 20 – 200 Orbital strokes per min (without load)

• Digital PID controller
• Acrylic single walled body
• Withstand high temperatures

• Acrylic Single Walled see through type
• Temperature Range: (Ambient+5) to 60 ⁰C
• Digital PID Controller with Pt 100 sensor having accuracy: +- 0.1 ⁰ C
• The recirculation fan fitted inside achieves uniformity of Temperature

• Epoxy powder painted
• High temperature range
• Provided with sensor

• Body Material: MS Painted with Epoxy Powder
• Temperature range: (Ambient + 5) to 60 ⁰ C
• Fitted with recirculation fan in the chamber for uniformity of temperature
• Digital Display with PID Controller of Accuracy: +- 0.1⁰ C by using PT-100 as Sensor
• 2 plates of 96 wells can be placed

• Higher orbital strokes per minute
• High shaking speed
• Corrosion resistant

• Body Material: MS Painted with Powder Coated
• Temperature range: (5⁰ C Above Ambient ) to 60 ⁰ C
• Shaking Speed: 20-200 Orbital strokes per min
• Fitted with recirculation fan in the chamber for uniformity of temperature
• Digital Display with microprocessor based PID Controller
• Accuracy: +- 0.1⁰ C by using PT-100 as Sensor

• Non volatile memory for the set point
• Castor wheels
• Acrylic doors

• Interior cabinet: SS 316
• Exterior cabinet: SS 304
• Temperature range: 5 ⁰C to 60 ⁰C
• Accuracy/ Uniformity: +- 0.5 ⁰C/ +- 1 ⁰C
• Safety: Provided to cut off heater above 70 ⁰ C
• Display/ Control: PID Controller with resolution 0.1 ⁰ C
• Accuracy: +- 0.5 ⁰ C with Non-Volatile storage memory for the set Point
• Refrigeration: CFC free compressor utilizing R134a Eco-friendly refrigeration
• Observation: Inner transparent acrylic door and outer door key lockable
• Feet: Castor wheels
• Mains Power: 230 V/50 Hz AC

• Interior cabinet- SS 304
• Exterior cabinet: MS powder coated
• Temperature range: 5 ⁰C to 60 ⁰C Accuracy/ Uniformity: +- 0.5 ⁰C/ +- 1 ⁰C
• Safety: Provided to cut off heater above 70 ⁰ C
• Display/ Control: PID Controller with resolution 0.1 ⁰ C and accuracy+- 0.5 ⁰ C with Non-Volatile storage memory for the set Point.
• Refrigeration: CFC free compressor utilizing R134a Eco friendlyrefrigeration
• Observation: Inner transparent acrylic door and outer door key lockable.
• Feet: Castor wheels
• Mains Power: 230V/ 50Hz AC

Rivotek(TM) Bacteriological Incubator - GMP Model:

Specifications

• Tripled walled Incubator
• Outer body - SS 304
• Inner Body - SS 316
• Gap between 2 walls filled with glass wool.
• Inner full-length acrylic door is provided.
• Supplied with SS trays
• Temperature range: 5 ⁰C above ambient (room temperature) to 60 ⁰C.
• Forced air circulation by means of a motorized blower
• PID Controller with Pt100 sensor with resolution: 0.1 ⁰ C and accuracy: +- 0.5 ⁰ C.
• Electrically operated on 230 V AC.

Specification

• Double walled Incubator
• Outer body -MS duly powder coated
• Inner Body -SS 304
• Gap between 2 walls filled with glass wool.
• Inner full-length acrylic door is provided.
• Supplied with SS trays
• Temperature range: 5 ⁰C above ambient (room temperature) to 60 ⁰C.
• PID Controller with Pt100 sensor with resolution:1 ⁰ C and accuracy: +- 1 ⁰C
• Electrically operated on 230 V AC.