Laboratory Equipment

• Glass wool insulation
• Longer life
• Versatile heat dissipation procedures

• Outer Body made of thick gauge S.S. 304 grade for GMP Models and MS Powder Coated for STD Modeles
• Inner chamber is made of thick gauge S.S. 304 grade for STD and GMP Models
• Temperature controlled by thermostat
• Specially made extra long heating elements for high heat dissipation
• Uniformity & longer life
• The gap between the two walls is filled with glass wool
• Lid is made 304"S.S. with 6 holes & 12 holes of 3"dia
• Provided with indicating lamps and on/off switch
• Temp range is above ambient+5 to 99 Degree C
• Operation 240 volts AC

Double walled construction inner made of Stainless .Steel & exterior made of powder coated/fully Stainless. The gap between the two walls filled with glass wool insulation. Heating is by immersion type heaters. Temperature Controlled by Electronic Digital Temperature Controller with PT 100 as sensor. A motor with stirrer is mounted on a base & fitted on the side of the bath for uniformity. Lid made of Stainless. Steel.

Standard Features and Specifications

• Bath Material - SS 304, Exterior Material - MS Powder coated,

• Digital display with PID Controller to +- 0.1 DegreeC accuracy by using PT 100 sensor.

Temperature Range 5^oC above ambient to 95^oC

Control Accuracy +_1.0^oC.

• Fitted with Circulator for uniformity of temperature inside the Bath.

Ordering Information

• Versatile pumping action
• Compatible with a range of fluids
• Corrosion resistant

• Exterior Material: MS Powder coated
• Bath Material: SS 304
• Digital display with PID Controller: +- 0.1 DegreeC accuracy by using PT 100 sensor
• Temperature Range ambient: 95 DegreeC
• Fitted with Circulator for uniformity of temperature inside the Bath

RIVOTEK ^TM, WATER BATH SHAKER

Specifications

• Body Material - MS Painted with Epoxy Powder.
• Tray Material - Stainless steel
• Temperature range ambient to 95 ⁰ C
• Digital Display with PID Controller of Accuracy +- 0.1⁰C by using PT - 100 as Sensor
• Tray Material - Stainless steel
• Shaking Speed 20 - 200 Orbital strokes per min. (without load)
• Supplied with SS Gabled Cover.

Note SS Lotus clamps for holding the flasks in the shakers to be order separately.

RIVOTEK ^TM, OIL BATH

Specifications

• Bath Material – SS 316, Single walled without insulation.
• Heater material used in Bath – SS 316, Bakelite Handles are provided to bath.
• Separate temperature Control unit with ± 1.0 ⁰C accuracy controls temperature from Ambient to 250 ⁰C by PID Controller using PT 100 sensor.
• A unit can be kept 2 mtrs away from the oil bath.
• Oil Bath can be used for heating round bottom glass flasks.

Rivotek(TM) VORTEX MIXER - LIGHT DUTY

Specifications

• Body made of MS Powder coated and the base of cast iron painted with powder paint.
• Single rubber cup provided for vortexing the samples
• Provided with anti-slip rubber feet
• Variable Speed in RPM 200 - 2800

Specifications

• Suitable for mini tissue culture work and blood suspensions without sedimentation or foaming.
• Also suitable for vigorous agitation and end to end mixing.
• Tubes can be mounted at any angle from horizontal to vertical, tubes with respect to axis of rotation.
• Different sizes from 12 mm to 25 mm dia can be accommodated
• Speed Variable 5 - 50 RPM (without load)

(While placing the order, please specify the dimensions of the tubes you propose to use)

RIVOTEK ^TM, Micro Plate Shaker

Specifications:

• Body Material - MS Painted with Epoxy Powder.
• Tray Material - Stainless steel
• Compact size can accommodate 2 Nos. Microplate.
• Shaking Speed: 100 - 1500 strokes per min
• Orbital shaking movement is of very small amplitude of 1 mm dia.
• Permanent Magnet Geared DC motor with 1 mm dia. Orbital motion is used.

Specifications:

• Body material is MS powder coated
• Tray material is SS
• Shaking Speed: 8-60 strokes per min.
• Permanent Magnet Geared DC motor as driving mechanism is used
• Tray Size in mm: 300 x 275 x 25

RIVOTEK ^TM, ROCKING PLATFORM – DOUBLE TIER

Specifications:

• Body material is MS powder coated
• Tray material is SS
• Shaking Speed: 8-60 strokes per min.
• Permanent Magnet Geared DC motor as driving mechanism is used
• Tray Size in mm: 300 X 275 X 25

RIVOTEK ^TM, TEST TUBE ROTATOR

SPECIFICATIONS

• Body material is MS powder coated
• Dimensions mm 500 L x 250 D x 300 H
• Speed Variable from 5 - 50 RPM. (Without load)
• Permanent magnet DC geared motor.
• Noise-free silent operation.
• Constant current speed control circuit for steady speed.
• Digital Indication of speed (Optional)
• Electronic Timer (Optional)

• Uniform motion
• Programmable speed and running time
• Advanced microprocessor controls

• Body Material - MS Painted with Epoxy Powder.
• Tray Material - Stainless steel
• Shaking Speed 20 - 200 Orbital strokes per min (Without Load)
• Permanent Magnet Geared DC motor with 25 mm dia. Motion

We are providing the latest Bench Top Reciprocating Shaker to our customers. The offered reciprocating shakers are ideal for growing bacteria, dissolution studies and staining of electrophoresis gels and chemical extractions. The counter balance drive mechanism of these reciprocating shakers ensures smooth & vibration free operation. Also, the metal locking tab on speed control knob prevents the speed variations.

Features:

• Prevents speed variations
• Smooth & vibration free operation
• Adjustable shaking speed

Other Details:

• For growing of micro organism and tissue cells.
• Body Material - MS Painted with Epoxy Powder
• Tray Material - Stainless steel
• Shaking Speed: 10 - 200 Orbital strokes per min
• Permanent Magnet Geared DC motor with 25 mm dia
• Motion

Specifications:

Specifications

Body Material - MS Powder coated.

Tray Material - Stainless steel SS 304

Shaking Speed 20 - 300 Orbital strokes per min (Without Load)

Works on 230 Volt AC Single phase supply.

SPECIAL FEATURES

VFD Drive (Variable Frequency Drive) of 230 V, I Phase Input.

Ac motor Brushless Induction Motor, for 24 hrs operation.

Digital Voltmeter With LCD display for better view in the dark room.

Digital Overhead Stirrer

Overhead stirrer is suitable for mixture of high viscosity liquid or solid-liquid. Widely used in chemical synthesis, pharmaceutical, physical and chemical analysis, petrochemical, cosmetics, health care, food, biotechnology and other fields.

Features

- High reliability, long continuous service, outstanding performance
- Cover the speed range from 0 to 2200rpm, the speed is accurate and controlled
- Brushless DC motor drive, low noise and maintenance free
- LCD displays actual speed
- Overload protection, motor would automatically stop in case of continuous overload
- Anti-spill samples, PC control system starts up smoothly, prevent samples overflow

Specifications

Temperature range (Ambient + 5) to 60 ⁰ C

Digital Temperature Controller cum Indicator with PT - 100 Sensor having resolution 0.1 ⁰ C and accuracy +- 0.2 ⁰ C

Separate unit can be kept away from the warmer

Specifications

Temperature range (Ambient + 5) to 60 ⁰ C

Digital Temperature Controller cum Indicator with PT - 100 Sensor

having resolution 0.1 ⁰ C and accuracy +- 0.2 ⁰ C.

Separate unit can be kept 2 meters away from the warmer.

The RIVOTEK kjehldhal apparatus is suitable to heat soxhlet flask of different sizes. It is made up of thick gauge fresh c.r.c.a. sheets, chemically treated to remove all oil, grease etc. It is painted with primer followed by two coats of duco automotive paints.

The elements are made up of best quality 80/20 nichrome wire of appropriate gauge enclosed in multiple fiberglass sleeves, reinforced with rope and attached to fiberglass knitted fabric support to the bottom of the flask.

The soxhlet unit is provided with two vertical and a horizontal rod along with two boss heads for the fixation of soxhlet unit. The heating elements have individual energy regulators to control temperature. Pilot lamps indicate working of the elements.

The RIVOTEK heating mantles are manufactured with heating surface which are resilient and can hug the flasks to take several size or multi size flasks in the same mantle as indicated in the table below. The size of 10 litres has two heating circuits and the size of 20 ltrs have 3 heating circuits. When heating a small flask or when the contents of the flask are low, the upper heating circuits can be switched off by a switch or switches provided on the outer metal case.

Construction of these laboratory heating mantle are similar to standard heating mantle but the temperature is controlled by digital temperature controller-cum- indicator

These laboratory heating mantles are designed to take only one size of flask. Various sizes are available to fit around bottom flasks of capacity from 100 ml to 2000 ml. The snug fit of the heating surface, which is in close contact with the flask, ensures good thermal efficiency.

RIVOTEK ^TM, HEATING BLOCK / DRY BATH

RIVOTEK(TM) - Bunsen Burner - (Digital)

Features

Conically shaped refractory crucible

Stainless Steel cylindrical body SS 304 with mirror finish

Control Panel made of SS 304 with mirror finish

Maximum working temp. 500 ⁰C. Approximate Temperature.

The temperature is controlled by digital PID temperature controller.

Fuse fitted on backside for overload protection.(SAFETY)

Works at 1 Phase 230 Volts 50 Hz

Specifications

Work at 230 Volts AC only

Maximum working temp. 500 ⁰C

Shape Refractory crucible

Apparatus consists of heating element

Rivotek™ PERISTALTIC PUMP

Specifications:

• Body Material - MS Painted with Epoxy Powder.
• Single Channel
• Stage made up of cast aluminum with Black epoxy powder paint
• Rollers of Cast Nylon
• Supplied with 1 meter transparent silicon tube
• Reversible flow control
• Pumps different flow rate are available

Rivotek(TM) ULTRASONIC CLEANER
Specifications:

• Ultrasonic Generator: SMPS based Electronics
• Frequency: 30 +- 3 KHz
• Transducer: PZT crystals (Morgan Matrac U.K. make) bonded on the base of the tank with welbond technique.
• Lid: Provided in SS304
• Temperature Control: By cut-off thermostat accuracy +- 3 ⁰C preset at 60 ⁰C
• Timer: Incorporated 0 - 15 minutes timer is provided to set the cleaning time.
• SS Basket: Provided
• Drain: Drain valve provided at the rear side of the tank (not included for 1.5 litre. model)
• Electric supply: 230V/ 50Hz AC, single phase.

Rivotek(TM) ULTRASONIC SONICATOR

Specifications

• Ultrasonic Generator
• Solid state design with auto-tuning
• Frequency 30 KHz +- 3 KHz (Factory Set)
• Ultrasonic Horn Mounted on vertical stand with flat bed at the bottom of the stand
• Timer 0 -15 minute's mechanical timer is provided
• Digital Cyclic Timer Factory set for 15 sec on and 15 sec off mode.
• Probe S.S. probe tip
• Ultrasonic Power 120 / 250 Watts
• Electric Supply 230 V AC, 50Hz, single phase

Vortex Mixer VM-96A

Low profile design and highly touch sensitive sensor reduce wrist stresses when pushing and holding experiment tools resulting in less fatigue and less unpleasant feeling .

Features

• Well-balanced design and optimized safety features.
• Low-profile with small footprint ideal for use on lab benches and within fume hoods or clean benches.
• On touch operation mode, real-time and dynamic mixing made even with gentle touch.

- Every point of the top surface is highly reactive to gentle touch due to widely built in sensitive sensors.

• Selective mixing modes with variable speed control knob. Touch / Continuous / High-continuous.
• Built-in LED lamps in case of VM-96A for easy recognition of the mixing mode selected.
• Sparkless BLDC motor adopted for safety, quick acceleration, and low maintenance.
• Built-in safety features against overload and over current.
• Chemically resistant polypropylene molded exterior.
• Wide range of accessories available.

Magnetic StirrerMS-12BB

Powerful magnets and motors guarantee a high-speed and a good management of the devices.

• Ergonomic designed, lightweight, easy to operate, and low profile.
• Best-in-the-class with broad speed range and suitable for high-speed rotation experimental environment.
• Spark-less, silent and durable BLDC motor.
• Wide top plate.
• Two non-slip silicon plate covers (white & black) provided
• Non-slip strength rubber feet.
• Strong magnetic coupling to ensure constant stirring.

Safety

• Unit is safely designed to protect internal components from accidental spills.
• Built-in thermal shutdown and current limit protection

Magnetic Stirrer MS-17BB

Powerful magnets and motors guarantee a high-speed and a good management of the devices.

• Ergonomic designed, lightweight, easy to operate, and low profile.
• Best-in-the-class with broad speed range and suitable for high-speed rotation experimental environment.
• Spark-less, silent and durable BLDC motor.
• Wide top plate.
• Two non-slip silicon plate covers (white & black) provided for
• Non-slip strength rubber feet.
• Strong magnetic coupling to ensure constant stirring.

Safety

• Unit is safely designed to protect internal components from accidental spills.
• Built-in thermal shutdown and current limit protection.

Magnetic Stirrer MS-22GB

Powerful magnets and motors guarantee a high-speed and a good management of the devices.

• Ergonomic designed, lightweight, easy to operate, and low profile.
• Best-in-the-class with broad speed range and suitable for high-speed rotation experimental environment.
• Spark-less, silent and durable BLDC motor.
• Wide top plate.
• Two non-slip silicon plate covers (white & black) provided for
• Non-slip strength rubber feet.
• Strong magnetic coupling to ensure constant stirring.

Safety

• Unit is safely designed to protect internal components from accidental spills.
• Built-in thermal shutdown and current limit protection

• Concentric rings
• Optimum diameter
• Large temperature range

• Outer body made SS304 for GMP Model and MS Powder Coated for STD Model
• Inner body made SS 304 for STD and GMP Models
• Specially made extra long heating elements for durability
• Better uniformity of temperature
• Concentric rings 3" dia i.e (75 mm)
• Temperature range Ambient + 5 DegreeC to 99 DegreeC
• Provided with microprocessor based digital PID controller
• PT100 temperature sensor having resolution 0.1 DegreeC
• Accuracy 1.0 DegreeC
• Provided with indicating lamp & on/off switch
• Electrically operated 230 V AC single phase power